AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
See the difference
Before
After
Before
After
Before
AfterHow Much Does AC Repair Cost in Irving?
AC repair in Irving typically costs $150 to $650, depending on the part that failed and how far the technician has to go to reach it. A capacitor or contactor swap sits at the low end; a failed compressor or a refrigerant leak that needs chasing sits at the high end. Every price we quote is set per job by a written estimate, and the estimate is free.
That range holds across the branded equipment most Irving homeowners already own. We’re factory-familiar with Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, so the diagnosis starts from what your system actually is rather than from a guess about what it might be. You shouldn’t have to explain your equipment to your technician.
Key Takeaways
- Most Irving AC repairs land between $150 and $650.
- Diagnosis always comes first. The right fix for your system is the one the test readings point to.
- Written estimates are free, and the written number is the final number.
- Call (855) 473-9031. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
AC Repair Cost Breakdown (2026)
Here’s how the work breaks down by line item in the Irving market this year. These are typical estimated ranges, not quotes. The written estimate you receive sets the final price.
| Repair Type | Typical Estimated Cost |
|---|---|
| Diagnostic visit and system assessment | Free with estimate |
| Capacitor or contactor replacement | $150 – $280 |
| Blower motor repair or replacement | $280 – $520 |
| Condenser fan motor | $260 – $480 |
| Refrigerant leak search and recharge | $250 – $600 |
| Evaporator or condenser coil work | $400 – $650 |
| Compressor replacement | $550 – $650+ |
| Thermostat replacement | $150 – $350 |
| Drain line clearing and float switch | $150 – $250 |
| Full system tune-up | $80 – $200 |
The single biggest swing factor is whether the failure is electrical or mechanical. A capacitor is a small part with a short install; a compressor is a large part with a long one, and the labor is what moves the number. Coil work sits in the middle because access matters: a coil you can reach from the front of the air handler is a different job from one buried behind ductwork in a tight attic.
If the estimate climbs toward the top of the range, it’s worth asking a straight question: is this repair the right call, or is replacement the smarter money? Our AC repair work is diagnosis-first, which means we tell you plainly when a $600 repair on a 20-year-old condenser makes less sense than putting that money toward a new system. AC installation in Irving runs $3,500 to $7,500 as a typical estimated range, so the comparison is a real one, not a sales tactic.
What Affects AC Repair Pricing in Irving
Five things move the number more than anything else on a job in this city.
- Equipment brand and age. Parts availability varies by manufacturer. A part for a current Carrier or Trane unit is usually a stock item; a discontinued control board for an older Goodman or York system can take longer to source and cost more when it arrives. Knowing the nine brands we service means we’re not guessing at part numbers on your dime.
- System size and configuration. A single-stage unit in a two-bedroom ranch is a faster job than a variable-speed system in a larger house. More controls, more sensors, more to test before the fault shows itself.
- Where the equipment sits. Irving homes run the gamut from slab-on-grade with the condenser at ground level to older properties with air handlers in tight attic spaces and closets. Access is labor, and labor is a line item. A unit you can walk up to is cheaper to work on than one you have to fold yourself into a crawl to reach.
- Refrigerant type. Systems running older refrigerant blends cost more to recharge than systems on current refrigerant. If a leak is involved, the search and the recharge are separate line items and both show up on the estimate.
- Time of the cooling season. Late summer in the Dallas-Fort Worth area means long runtimes and hard-working condensers. Parts that are marginal in April tend to fail in August, and when they do, that’s a repair, not a tune-up. Getting ahead of it with a tune-up at $80 to $200 is the cheaper path.
- Whether the fault is singular or stacked. A unit that quit because of one failed capacitor is a simple job. A unit that quit because of a failed capacitor, a clogged drain line, and a dirty evaporator coil takes longer to bring back to spec.
How to Save on AC Repair
The cheapest repair is the one you don’t need. A few habits genuinely cut cost in this climate.
- Change the filter on schedule. A restricted filter strains the blower and drives up static pressure. It’s the least expensive maintenance you can do and it prevents a category of failures entirely.
- Keep the condenser clear. Clear debris and vegetation from around the outdoor unit. A condenser that can’t reject heat runs longer and hotter, which wears parts faster.
- Book a tune-up before the peak. At $80 to $200, a tune-up is a fraction of a mid-summer repair. It’s also the best chance to catch a weak capacitor or a slow drain before either becomes an outage.
- Get the estimate in writing before work starts. Ours is free, and it’s itemized. No service-call fee, no diagnostic charge, no surprise line items at the end.
- Ask about the whole system, not just the failed part. If the technician is already at your air handler, having them check the furnace heat exchanger and blower at the same time costs little and prevents a second visit later. Heating and cooling, handled under one roof.
When you’re ready for a real number, call (855) 473-9031. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Brand Familiarity Changes the Price
A generalist technician diagnosing a Carrier system they rarely see will spend time reading the wiring diagram. A technician who works on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard every week already knows the layout. That time difference is real money on the invoice, and it’s why we keep our service menu narrow: Kingsley AC Repair does AC repair, AC installation, and furnace repair. Nothing else.
Nine brands. One standard. Every job is held to the Kingsley standard, which means the same diagnostic sequence, the same parts discipline, and the same written estimate whether your system is a 2024 Daikin or a 2006 American Standard. Brand-neutral diagnostics mean the recommendation follows the system’s condition and your situation, not an equipment quota.
Kingsley AC Repair has served the Irving area since 2014, and the company has been at this work for 12 years. That’s long enough to know which parts fail in this climate and which ones get replaced unnecessarily by shops that guess.
Repair or Replace? A Straight Answer
If the repair costs more than a third of what a new system would run, and the unit is past its expected service life, replacement usually wins on total cost. If the system is younger and the failure is a single component, repair is almost always the better money.
The Irving number to hold in your head: AC installation runs $3,500 to $7,500 as a typical estimated range. So a $600 compressor job on a 19-year-old unit is a different decision from the same $600 on a 7-year-old unit. We’ll tell you which side of that line you’re on, and we’ll say so plainly. No pressure, no upsell script.
Safety: What We Won’t Talk You Through
Refrigerant systems are pressurized, and the electrical side of an air handler includes capacitors that hold a charge after the disconnect is pulled. We don’t walk homeowners through opening a unit or handling refrigerant. That’s work for a trained professional with the right gauges and meter. What you can safely do is check the filter, confirm the thermostat is set to cool and calling, and look at the outdoor unit for obvious debris or a tripped breaker. Beyond that, call us.
FAQs – AC Repair Cost
How much does AC repair cost in Irving?
Most AC repairs in Irving cost between $150 and $650 as a typical estimated range. A capacitor or contactor replacement sits near $150 to $280, while compressor work and coil repairs reach the top of that band. The written estimate sets the final price. Call (855) 473-9031 for an exact quote – estimates are free.
Is it cheaper to repair or replace my AC unit?
Repair is cheaper when the fix is a single component and the system is under roughly 12 to 15 years old. Replacement makes more sense when the repair approaches a third of the $3,500 to $7,500 AC installation range and the unit is near the end of its life. We’ll give you both numbers in writing so the comparison is clear. Call (855) 473-9031 to set up a free estimate.
How much does a tune-up cost in Irving?
A tune-up in Irving typically runs $80 to $200 as an estimated range. It covers the checks that catch failing capacitors, dirty coils, and slow drain lines before they turn into a repair. The written estimate sets the final price. Call (855) 473-9031 to schedule one.
Can you come today?
In most cases, yes. Same-day service is available, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We answer 24/7, and a call outside dispatch hours is booked into the next opening. Call (855) 473-9031.
What does furnace repair cost in Irving?
Furnace repair in Irving typically runs $150 to $700 as an estimated range, similar to cooling work. Igniters, flame sensors, and inducer motors are the common failures. The written estimate sets the final price. Call (855) 473-9031 – estimates are free.
Contact Us for a Free Estimate
If your system is short-cycling, blowing warm air, or just not keeping up, the fastest path to a real number is a call. Kingsley AC Repair sends an HVAC specialist, not a multi-trade generalist, and every estimate is written and free. We know your brand, and we know what it costs to fix it here in Irving. Call (855) 473-9031. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Closed Saturday.
Pricing reflects the Irving market as of 2026. Kingsley AC Repair offers free estimates – call (855) 473-9031.
What Our Customers Say
"Work was done properly. I did have to follow up twice to get the invoice and the warranty info emailed over. The repair itself has been trouble free."
- Carlos Hernandez"Drain line was clogged and the safety switch had shut the whole system down. Cleared it, flushed it, and installed a proper cleanout so I can pour vinegar through it myself once a season."
- Robert Pruitt"New system install, two days, and they were careful with the floors and the attic access the entire time. Registered the warranty for me and emailed the paperwork."
- Shane Quinn