AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
See the difference
Before
After
Before
After
Before
AfterHow Much Does AC Installation Cost in Irving?
AC installation in Irving typically runs $3,500 to $7,500 for a complete system, including the outdoor condenser, indoor air handler or coil, line set, and standard connections. That range covers most homes in the area, from a straightforward single-stage swap in a 1,500-square-foot house to a higher-efficiency variable-speed system with ductwork changes. The written estimate is what sets your final price, and at Kingsley AC Repair that estimate is free.
We’re an HVAC specialist shop, not a general contractor, so the people quoting your job install air conditioning for a living. We’re factory-familiar with nine major brands – Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard – which means when we quote an Irving install, we’re pricing equipment we actually know. You shouldn’t have to explain your equipment to your technician. Call (855) 473-9031. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways for Irving Homeowners
- Most full AC installations in Irving fall between $3,500 and $7,500.
- Equipment size, efficiency rating, and any ductwork changes move you up or down within that band.
- Installation is a different job from repair. If your system can be fixed, an AC repair in Irving typically costs $150 to $650, which is worth comparing before you replace.
- The estimate is free, and the price is set per job in writing, not by a phone quote.
- We serve all nine of the major brands most Irving homes already have, so no brand is treated as a specialty item.
AC Installation Cost Breakdown (2026)
Here’s how a typical Irving installation breaks down. These are estimated ranges for the work, not a menu of add-ons you must buy. Real pricing depends on the equipment and the condition of your home.
| Line Item | Typical Estimated Range |
|---|---|
| Full AC installation (complete system, standard home) | $3,500 – $7,500 |
| Standard single-stage system | Lower end of the range |
| Two-stage or variable-speed system | Upper end of the range |
| Air handler or indoor coil replacement (with system) | Included in the full range |
| Ductwork modification or new duct runs | Adds to the total, quoted separately in writing |
| AC repair (comparison, if your current system can be saved) | $150 – $650 |
| Furnace repair (same home, heating season) | $150 – $700 |
| AC tune-up | $80 – $200 |
What pushes a job toward $7,500 is usually the equipment itself: a variable-speed system with a higher efficiency rating costs more than a single-stage unit, and that gap is real. Ductwork is the other big factor. If your Irving home has older flex duct that’s undersized for the new equipment, or if the plenum needs reworking, that adds labor and material on top of the system. On the lower end, a like-for-like swap where the existing line set and ductwork are reusable is the cheapest path, and it’s the one we prefer to quote when the home honestly supports it. We won’t sell you a bigger system than your house needs to hit a price point.
For a closer look at the equipment side of this decision, our AC installation page walks through what a full install involves from start to finish.
What Affects AC Installation Pricing in Irving
Several things move the number. Here’s what we look at when we quote an Irving job.
- System size. An AC is sized to the home, usually by the ton. A larger home needs a larger system, and larger systems cost more. We measure and calculate load rather than guess from square footage alone.
- Efficiency rating. Higher-rated equipment carries a higher purchase price. Whether that pays back for your home depends on how much cooling season you actually run, and Irving homes run a long one.
- Ductwork condition. This is the most common surprise on an install. Old, leaky, or undersized ductwork has to be addressed for a new system to perform, and that work is quoted separately and in writing.
- Brand and model. The nine brands we service have their own price tiers and their own strengths. A Goodman isn’t priced like a Trane, and we’ll tell you plainly which one fits your home and budget.
- Where the equipment sits. A condenser tucked on a narrow side yard or an air handler in a tight attic is harder to reach and slower to install than one with open access. Labor reflects that.
- Electrical and line set needs. Sometimes a new system needs electrical work or a new line set. Those are separate line items we quote upfront, not mid-job surprises.
How to Save on AC Installation in Irving
You can’t cut the cost of equipment without cutting quality, but you can keep your final number at the low end of the $3,500 to $7,500 band. Here’s how.
- Get the sizing right the first time. An oversized system short-cycles, runs inefficiently, and won’t last. Proper sizing is the cheapest money you’ll ever spend on an AC.
- Reuse what’s sound. If your existing line set and ductwork are in good shape, we quote a like-for-like swap. That’s a lower total than a full rework.
- Ask for repair vs. replace honesty. If you’re looking at $150 to $650 for a repair and the system has life left, that’s often the smarter move than $3,500-plus for a new install. We’ll tell you which one your system actually needs.
- Get a written estimate before anything is ordered. Free estimates exist for a reason. Call (855) 473-9031 for yours.
We quote the equipment your home needs, not the equipment with the best margin. Nine brands, one standard – that’s the Kingsley bar, and it applies to every install we quote in Irving.
FAQ – AC Installation Cost in Irving
How much does a new AC cost in Irving?
A full new AC installation in Irving typically costs $3,500 to $7,500. The lower end is a standard single-stage system in a home with reusable ductwork; the upper end is a higher-efficiency, variable-speed system, often with ductwork changes. Call (855) 473-9031 for an exact quote – the estimate is free.
Is it cheaper to repair or replace my AC in Irving?
A repair in Irving typically runs $150 to $650, versus $3,500 to $7,500 for a full replacement. If the system is repairable and has useful life left, repair is usually the cheaper and smarter call. If it’s failing repeatedly, replacement makes more sense. We diagnose first and give you the straight answer either way.
What does AC installation include in Irving?
A standard Irving AC installation includes the outdoor condenser, indoor air handler or coil, line set, and standard connections. Ductwork modification, electrical changes, and other extras are quoted as separate line items in the written estimate so you see exactly what you’re paying for.
Why does my AC installation cost more than my neighbor’s?
Differences in home size, system efficiency, and ductwork condition account for most of it. Two Irving homes of similar square footage can still need different equipment or duct work, and that changes the total. The only way to know your number is a written estimate on your home.
Do you install all brands?
We’re certified to service nine major brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. If your home already has one of these systems, we’re familiar with it before we arrive. For brands outside that list, call and we’ll tell you honestly whether we can help.
Why Homeowners in Irving Choose Kingsley for Installation
We focus on three services: AC repair, AC installation, and furnace repair. That’s it. Every technician we send is an HVAC professional, not a generalist filling a schedule between unrelated jobs. That focus is why our installs are priced on the system and the home, not on what a sales quota wants to sell you. Heating and cooling, handled – and the same shop handles both seasons, so the relationship you build on an AC install carries forward into furnace repair when the weather turns.
We’ve served the Irving area since 2014. Same-day service is available, and dispatch runs from 7am to 7pm, Sunday through Friday; we’re closed on Saturday. Every job is held to the Kingsley standard, meaning it’s done right the first time or we come back and make it right.
Get Your Free AC Installation Estimate in Irving
If you want a real number for your home – not a phone quote, a written one – call (855) 473-9031 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get an honest breakdown of what your install involves, what it costs, and which brand best fits your home. That’s what a specialist does.
Pricing reflects the Irving market as of 2026. Kingsley AC Repair offers free estimates – call (855) 473-9031.
Written by the team at Kingsley AC Repair, serving Irving since 2014.
What Our Customers Say
"New system install, two days, and they were careful with the floors and the attic access the entire time. Registered the warranty for me and emailed the paperwork."
- Shane Quinn"Two other companies told me I needed a whole new system. He put gauges on it, found a leak at a fitting on the line set, repaired it and recharged. That was 14 months ago and it's still holding."
- Rafael Morales"Blower motor on a 12 year old furnace. He gave me the honest math on repair versus replace and did not push me toward the bigger ticket. We repaired it and it's been fine."
- Ruben Flores