AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrane HVAC in Irving, TX
We provide independent Trane service across Irving, from AC repair and heat pump repair to ductless system work. What makes our Trane work different here is that we match the fix to the building: the crushed flex duct in a 1960s slab ranch near downtown and the rooftop packaged unit on a Las Colinas tower fail for completely different reasons. We’re an independent Trane specialist, not affiliated with or authorized by the manufacturer, and we’ve serviced Trane systems across Irving since 2014. Call (855) 473-9031. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Irving Residents Choose Us for Trane Service
You shouldn’t have to explain your equipment to your technician. When we pull up to a Trane XR14 or an XV variable-speed system in Irving, we already know the failure patterns this climate exposes: heat-soaked attic runs, inverter modules pushed hard through 100°F+ summers, reversing valves that stick after a hard freeze. Our technicians aren’t learning Trane on your dime.
Kingsley AC Repair is led by Ricardo Radcliffe, who grew up near Las Colinas and has spent his career working HVAC systems across the Dallas-Fort Worth Metroplex. He trained at Tarrant County College, worked in the trade well over a decade, and started Kingsley in 2014. Customers around Irving know him for being straight: fast diagnosis, plain explanation, no parts recommended that don’t need replacing. That’s the bar every job here is held to. Tell us what it’s doing, and we’ll tell you what it needs.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Common Trane HVAC Problems We Solve in Irving
These are the Trane failures we run into most in Irving, and why they happen here:
- Heat-soaked duct runs starving airflow. In south Irving’s low attics, Trane air handlers paired with older flex duct suffer badly. Duct runs leak and collapse, the compressor overheats, and the system ices or trips on overload while the condenser gets blamed.
- Variable-speed boards and inverter modules. Trane variable-speed condenser electronics fail more often during long DFW summers over 100°F, especially when an attic-mounted air handler is fed by undersized return ducts. Restricted return air is the quiet killer.
- Heat pump reversing valves and defrost boards. Trane heat pumps take a beating during hard winter freezes like the 2021 Uri event. Stuck reversing valves and failed defrost boards produce a lot of misdiagnosed “no heat” calls.
- Condensate pans and float switches. In Irving’s high humidity, Trane air handler drain pans and float switches corrode and clog. You get water damage and shutdowns that look electrical but aren’t.
- Capacitors and contactors on aging XR series units. The XR13 and XR14 are workhorses, but fifteen summers of cycling in Texas heat wears out start components. These are usually simple, well-priced fixes when they’re caught early.
Trane Service in Irving: What Local Conditions Mean for Your Equipment
Here’s the Irving detail that changes how we diagnose a Trane system. In older south Irving neighborhoods, many homes still have original 1970s-80s ductwork buried in low attic space where summer temperatures climb past 140°F. That ductwork wasn’t built for the load a modern Trane air handler moves, and decades of heat cycling make it brittle, leaky and prone to collapse. We routinely find duct-chase and flex-duct failures before we ever suspect the condenser. So when a south Irving homeowner calls about weak cooling, we check the duct system first, not last. Trane equipment is built well. It can’t overcome ductwork that’s starving it of air, and no board swap fixes that. Getting the duct side right is often the whole repair.
Trane Models & Products We Service in Irving
We service the Trane lines Irving homeowners actually own: the XR series (XR13, XR14, XR15), the XL series (XL16i, XL18i, XL20i), Trane XV variable-speed systems, and Trane XR heat pumps. Alongside split systems we handle ductless mini-split work, which matters in Las Colinas buildings where running new ductwork isn’t an option. On parts, we make a deliberate call: OEM Trane parts for critical controls, boards and compressors so factory performance is preserved, and high-quality aftermarket parts for consumables like capacitors and ignitors when they meet spec. Nine brands, one standard. Trane is one of the nine we know inside out.
See the difference
Before
After
Before
After
Before
AfterTrane Service Pricing in Irving
These are typical estimated ranges for Irving. The written estimate sets the final price, and the estimate itself is free.
| Service | Typical Estimated Range |
|---|---|
| AC Repair | $150 – $650 |
| Furnace Repair | $150 – $700 |
| AC Installation | $3500 – $7500 |
| Tune-Up | $80 – $200 |
Where a repair lands in that range depends on what’s actually failed. A capacitor is at the low end. A variable-speed control board, a reversing valve, or a duct run replacement pushes toward the top. Installation depends on system size and how much ductwork needs correcting. A free estimate includes a full diagnosis, a plain explanation of what we found, and an honest repair-vs-replace call. If your Trane is over 12-15 years old and facing a major compressor or coil failure, we’ll tell you plainly that replacement often makes more sense. Call (855) 473-9031 for an exact quote.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Trane HVAC in Irving
No. Kingsley AC Repair is an independent Trane service provider. We are not affiliated with, authorized by, or a dealer for Trane. We repair, install and service Trane equipment with quality parts that fit it, and we make our recommendations on the condition of your system, not on a manufacturer relationship.
Yes, for critical components. We use OEM Trane parts for controls, boards and compressors to preserve factory performance, and high-quality aftermarket parts for consumables like capacitors and ignitors when they meet spec. If a part doesn’t belong on your system, we don’t put it there.
Most repairs are finished in a single visit. Diagnostics take under an hour, and a common repair like a capacitor or contactor is quick once we’ve confirmed the cause. If we need to correct ductwork or replace a board, it will still usually be done the same visit. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician to you without a long wait.
Split-system air conditioners, heat pumps (including the XR series), variable-speed systems, and ductless mini-splits. That includes service for Trane equipment in Las Colinas condos and mid-rise units where ductless is the practical choice. We also handle furnace repair.
Typical AC repair runs $150 – $650 and furnace repair runs $150 – $700, depending on the failed part and how much duct or control work is involved. A tune-up is $80 – $200. The written estimate sets the final price. Call (855) 473-9031 for an exact quote – estimates are free.
Service Areas Near Irving
We serve Irving and the surrounding Metroplex, including Grand Prairie, Lancaster, Glenn Heights, Balch Springs, and Carrollton. You’ll also find our Irving coverage and our Dallas service detailed separately. Kingsley is an independent specialist for nine brands, including Trane. We’re one HVAC-focused shop, not a multi-trade contractor, so every technician we send knows your equipment.
Book Your Trane Service in Irving Today
Whether your Trane system is blowing warm air near downtown or your Las Colinas heat pump won’t heat, we can help. Call (855) 473-9031. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is often available, and the estimate is free. Heating and cooling, handled.
Written by Ricardo Radcliffe, Owner at Kingsley AC Repair, serving Irving since 2014.