AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateHVAC Company in Irving, TX
When a furnace quits in Irving, it usually happens during the kind of hard freeze this part of North Texas rarely plans for. The homes here make the job specific: 1960s and 1970s single-story slab houses in south Irving run their heat through attic equipment and original ductwork, while the newer two-story builds in Las Colinas and Valley Ranch carry systems that need a very different set of skills. Kingsley AC Repair works on both, and we’ve served Irving since 2014. Call (855) 473-9031.
Why Irving Homes Are Different
Irving sits in the middle of the DFW Metroplex, and the swing between its older core and its newer north is wider than most cities post. Near downtown and the old Texas Stadium corridor, you’re standing in 1960s and 1970s single-story ranches with attic air handlers and ductwork that has been through five decades of 100°F summers. In Las Colinas and Valley Ranch, you’re in large two-story homes from the 2000s on, alongside mid-rise and high-rise towers where rooftop packaged units, VRF systems and central plant equipment are the norm. That means sizing and servicing a system street by street, not city by city.
North Texas weather does the rest. Long humid stretches over 100°F push condensate lines and refrigerant systems hard all summer, and then a hard winter freeze like the 2021 Uri event stresses heat pumps locals rarely expect to lean on. In older south Irving attics that top 140°F in summer, we routinely find flex-duct failures before anyone suspects the equipment itself.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Our Main Irving Services
Two services bring most Irving homeowners to the phone: cooling that stopped working and cooling that needs replacing.
AC Repair in Irving
Cooling is the dominant load in Irving, and the failures we see most often start above the ceiling rather than at the condenser. In south Irving’s low attic spaces, buried 1970s and 1980s flex duct splits and collapses long before the equipment gives out, so diagnosis starts with the duct chase and static pressure, not a guess at the compressor. In Las Colinas and Valley Ranch two-story homes, we’re more likely to be tracing refrigerant charge and condensate drainage on equipment that works hard through long humid stretches over 100°F. Every repair starts with brand-neutral diagnostics. For the full picture, see AC Repair in Irving.
AC Installation in Irving
Replacement in Irving begins with a load calculation sized to the house, not to the old nameplate. A 1970s ranch in south Irving with original ductwork may need duct corrections folded into the job before a new system can perform, while a Valley Ranch two-story usually needs the zoning and airflow balanced room by room. We install and service equipment from nine major manufacturers, so the recommendation follows the load calculation and your budget rather than a single brand on the truck. Details live on AC Installation in Irving.
Furnace Repair in Irving
Heating in Irving is the repair most homeowners delay until the house won’t stay warm, and it usually lands in the same 1960s and 1970s single-story slab ranches that dominate south Irving, where furnace equipment in a low attic meets original ductwork and occasional hard freezes like 2021’s Uri event. Those freezes are exactly when heat pumps and gas furnaces that coasted through mild winters finally show what’s worn. Our Furnace Repair work starts with a real diagnostic instead of a parts guess, and we’re trained to service Trane, Lennox and Goodman equipment, along with the rest of the nine brands we carry.
Gas Furnace Repair
Signs you need it
A gas furnace that clicks but won’t light, produces a yellow rather than blue flame, or gives off a faint rotten-egg smell needs a licensed technician and the gas shut off at the valve before anything else.
What it costs in Irving
Gas furnace repair in Irving typically runs $150 to $700, and the written estimate you get before work begins sets the final price.
How we do it
We shut down the gas and power, test the igniter, flame sensor and heat exchanger, inspect the flue and gas valve, then replace only the failed component and verify combustion before we leave.
Heat Pump Repair
Signs you need it
A heat pump that runs the blower but blows cool air in heating mode, ices over the outdoor coil and stays frozen, or trips the breaker repeatedly is telling you the reversing valve, defrost board or charge needs attention.
What it costs in Irving
Heat pump repair in Irving typically falls between $150 and $700, with the final figure set by the written estimate after diagnosis.
How we do it
We check refrigerant charge and pressures, test the reversing valve and defrost controls, inspect the auxiliary heat strips, and confirm the system switches cleanly between heating and cooling before closing the ticket.
What Furnace Repair Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Furnace repair (diagnosis and repair) | $150-$700 |
| Furnace tune-up | $80-$200 |
| Heat pump repair | $150-$700 |
Can a furnace be repaired the same day in Irving?
Often, yes. Most furnace and heat pump failures we see in Irving come down to ignition parts, flame sensors, blower components or refrigerant, and those are typically fixable on the same visit after diagnosis. Call (855) 473-9031 and we’ll book you into the next opening.
Should I repair my Irving furnace or replace it?
Repair when the failure is a single component and the heat exchanger and cabinet are sound; replace when the heat exchanger is cracked or the equipment is past its service life and repairs keep stacking up. We recommend based on your system’s condition, not on selling equipment.
Brands We Service in Irving
We’re trained and equipped to service nine major manufacturers, including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant and American Standard. Irving homeowners shouldn’t have to explain their own equipment to a technician, so we keep common ignition and blower parts on hand and order what we don’t carry for a quick turnaround. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for HVAC Company in Irving, TX
| Service | Typical range in Irving |
|---|---|
| AC repair | $150-$650 |
| AC installation | $3500-$7500 |
| Furnace repair | $150-$700 |
| Heat pump repair | $150-$700 |
| Tune-up | $80-$200 |
Two things push the figure up in Irving: duct corrections in older south Irving homes where the chase has failed, and high-efficiency equipment or zoning on a Las Colinas or Valley Ranch replacement. The written estimate sets the final price before any work starts, so you know what the job costs up front. All figures here are typical estimates, not a quote for your specific home.
Neighborhoods We Serve in Irving
Our crews work across Irving, from the older single-story blocks near downtown to the newer two-story homes and towers of Las Colinas and Valley Ranch. Older south Irving attics run hot, so summer diagnostics there take a bit more setup time, while equipment rooms in the towers of Las Colinas need access arranged in advance. Fast dispatch from 7am to 7pm, Sunday through Friday, and we answer 24/7 when you call.
- Downtown Irving and south Irving
- Las Colinas
- Valley Ranch
- The Texas Stadium corridor
Service Area – Cities Near Irving
Kingsley AC Repair serves Irving and the surrounding DFW cities. If you’re just outside our Irving coverage, we also work in Dallas, TX, Carrollton, TX, Grand Prairie, TX and Richardson, TX. Same brand-familiar technicians, same Kingsley standard across the metroplex.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Irving
We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Fast dispatch from 7am to 7pm is when crews are on the road.
Replacing a system generally requires a permit from the city’s building department, and many Las Colinas and Valley Ranch HOAs require approval for outdoor equipment changes. Ask both before scheduling, or call us and we’ll point you toward what your city and HOA need.
Call (855) 473-9031. We’ll book a visit, diagnose the system, and leave you with a written estimate at no charge. Estimates are free and the written price sets the final cost.
Call (855) 473-9031 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Kingsley AC Repair has served Irving since 2014.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local HVAC pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Irving Customers Say
"Two other companies told me I needed a whole new system. He put gauges on it, found a leak at a fitting on the line set, repaired it and recharged. That was 14 months ago and it's still holding."
- Rafael Morales"Blower motor on a 12 year old furnace. He gave me the honest math on repair versus replace and did not push me toward the bigger ticket. We repaired it and it's been fine."
- Ruben Flores"Ductwork in the attic had a disconnected run that had been dumping cold air into the insulation for who knows how long. He found it, resealed it, and one bedroom that was always hot is now normal."
- Brian Anderson